TCM-P179997
VOLVO
TCM-P179997 - CAN TCM/ABS Circuit Malfunction. Component Failures. Component or system operation obstructed or blocked
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo S80 (2007–)2014–2015Nur Getriebe: TG-81SC
- Volvo V40 (2013–)2015Nur Getriebe: TG-81SC
- Volvo V40 Cross Country (2013–)2015Nur Getriebe: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo V60 Cross Country (2015–)2015Nur Getriebe: TG-81SC
- Volvo V70 (2008–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC60 (2009–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC70 (2008–)2014–2015Nur Getriebe: TG-81SC
Was bedeutet der Fehlercode?
Although the fault code is named component failure and blocked, it applies when the speed value from the brake controller (BCM) is absent or unreliable. The brake control module receives the speed from four wheel sensors and sends it over the CAN network to the transmission control module, which uses it to calculate shift timing. The fault is general and does not say more precisely what type of fault it is.
Mögliche Ursachen
- Fault in the brake control module (BCM), which should be diagnosed first
- Sporadic open or shorted CAN wire between the brake control module and the TCM
- Damaged wheel sensor
- Internal fault inside the control module (TCM) of the gearbox
Was Sie tun können
- 1Read the fault codes in the CEM and the brake control module (BCM) and fix those first
- 2Clear this code only after the root fault has been fixed and its fault code cleared
- 3The brake system is safety critical, so do not work on it yourself. Have a workshop check the wheel sensors and the CAN lead
Symptome, die Sie bemerken können5
- Warning symbol and text message in the display
- Gear changes too early, too late or too often
- Gear changes take too long, or are harsh and jerky
- No forward or reverse movement with a gear engaged
- Engine stalls when a gear is engaged, and lockup does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.