VOLVO
TCM-P271168 - Unexpected Mechanical Gear Disengagement. Algorithm Based Failures. Event information
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo S80 (2007–)2014–2015Nur Getriebe: TG-81SC
- Volvo V40 (2013–)2015Nur Getriebe: TG-81SC
- Volvo V40 Cross Country (2013–)2015Nur Getriebe: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Nur Getriebe: TG-81SC
- Volvo V60 Cross Country (2015–)2015Nur Getriebe: TG-81SC
- Volvo V70 (2008–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC60 (2009–)2014–2015Nur Getriebe: TG-81SC
- Volvo XC70 (2008–)2014–2015Nur Getriebe: TG-81SC
Was bedeutet der Fehlercode?
The fault code is event controlled and does not indicate a fault in the control module; it is designed as information. It shows that one or more clutches did not engage as they should while shifting. When a fault occurs, the gearbox goes into neutral or uses the best gear available for the situation. The fault is general and does not say more precisely what type of fault it is.
Mögliche Ursachen
- Contact resistance or oxidation in plugs or connections
- Any of clutches C1 to C4, or brakes B1 and B2, are worn or damaged
- A line pressure solenoid (SL1 to SL5 or SLT) is damaged
- Poor quality of the transmission fluid
- Internal fault in the gearbox control system or in the transmission control module (TCM)
- Mechanical fault in the gearbox
Was Sie tun können
- 1The code is informative and does not indicate a fault in the control module. Read and note it, clear it and drive the car
- 2Have a workshop check the transmission oil level and quality, as poor oil can cause this code
- 3If the code comes back, have a workshop diagnose the clutches, the brakes and the line pressure solenoids
Symptome, die Sie bemerken können5
- Warning symbol and text message in the display
- The car lacks power, and the engine stalls when a gear is engaged or when slowing down
- No automatic gear change, and no forward or reverse movement with a gear engaged
- Lockup does not work, and gear changes take too long or are harsh and jerky
- Automatic engine start/stop does not work, and engine braking is absent or reduced
Was der Fehler beeinflussen kann3
- The control module blocks the gears that are not available
- Adaptation and slip lock-up are blocked
- Neutral control is blocked, and automatic engine start/stop is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.