Was bedeutet der Fehlercode TCM-P283100?

Diagnose und Fehlercodedefinition für TCM-P283100 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

TCM-P283100 - Shift Fork A Position Circuit. General Failure Information. No sub type information

System

Getriebesteuergerät (TCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

7 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (24)

Was bedeutet der Fehlercode?

The position sensor for shift fork A gives the transmission control module (TCM) information about the fork position. The control module uses this to engage the gears mechanically. The code shows that the position of shift fork A is unreasonable.

Mögliche Ursachen

Damaged position sensor
The sensor is in an incorrect position
Incorrect voltage supply to the sensor
Damaged transmission control module (TCM)

Was Sie tun können

1Read all transmission codes, deal with any other transmission codes first, then clear this code
2If you have a diagnostic tool: read the signal from the position sensor for shift fork A in live data and check whether any value stands out
3Have a workshop check the voltage supply to the position sensors
4Have a workshop decide whether the mechatronic unit needs replacing; if the values are outside or at the limit it should be replaced

Symptome, die Sie bemerken können5

The malfunction indicator lamp (check engine light) comes on or behaves abnormally
Yellow symbol and text message in the display
Harsh or jerky gear changes
No movement forward or in reverse with a gear selected
Shifts occur too early, too late or too often

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.