Was bedeutet der Fehlercode TCM-P283200?

Diagnose und Fehlercodedefinition für TCM-P283200 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

TCM-P283200 - Shift Fork A Position Circuit Range/Performance. General Failure Information. No sub type information

System

Getriebesteuergerät (TCM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

7 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (24)

Was bedeutet der Fehlercode?

The position sensor for shift fork A shows that the fork is in the wrong position, but the shaft speed relationship for the engaged gear looks plausible. The code indicates that the sensor signal does not match how the gear is actually engaged.

Mögliche Ursachen

Damaged position sensor
The sensor is in an incorrect position
Incorrect voltage supply to the sensor
Damaged transmission control module (TCM)

Was Sie tun können

1Read all transmission codes and deal with any other transmission codes first
2If you have a diagnostic tool: read the position sensor signal for shift fork A in live data during a road test and check whether the value jumps or differs
3Have a workshop measure the voltage supply to the position sensors; if it is wrong, the fault is inside the transmission control module
4If the values are at or outside the limit, have a workshop replace the mechatronic unit

Symptome, die Sie bemerken können5

The malfunction indicator lamp (check engine light) comes on or behaves abnormally
Yellow symbol and text message in the display
Harsh or jerky gear changes
No movement forward or in reverse with a gear selected
Gear changes take too long

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.