Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    TCM-U003900
    VOLVO

    TCM-U003900 - Lost Communication With Engine Control Module (ECM) on communication bus "B". General Failure Information. No sub type information

    System

    Getriebesteuergerät (TCM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    9 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo S60 (2011–)2014–2015Nur Getriebe: TG-81SC
    • Volvo S80 (2007–)2014–2015Nur Getriebe: TG-81SC
    • Volvo V40 (2013–)2015Nur Getriebe: TG-81SC
    • Volvo V40 Cross Country (2013–)2015Nur Getriebe: TG-81SC, TG-81SC AWD
    • Volvo V60 (2011–)2014–2015Nur Getriebe: TG-81SC
    • Volvo V60 Cross Country (2015–)2015Nur Getriebe: TG-81SC
    • Volvo V70 (2008–)2014–2015Nur Getriebe: TG-81SC
    • Volvo XC60 (2009–)2014–2015Nur Getriebe: TG-81SC
    • Volvo XC70 (2008–)2014–2015Nur Getriebe: TG-81SC

    Was bedeutet der Fehlercode?

    The transmission control module (TCM) is receiving no communication from the engine control module (ECM) on bus B. The fault most likely lies in the wiring between the two control modules, but it can also be in the engine control module. The code gives no specific fault type, only that communication has been interrupted.

    Mögliche Ursachen

    • Brief open circuit or short on the CAN wire linking the engine module (ECM) to the gearbox module (TCM)
    • Fault in the engine control module (ECM)
    • Incorrect signal configuration, for example if a control module has been replaced without new software being loaded

    Was Sie tun können

    1. 1Read codes from the engine control module (ECM) and the central electronic module (CEM) and deal with them first
    2. 2Clear the code and see whether it comes back; if it does not, the fault was most likely temporary
    3. 3Check the connectors and wiring of the CAN network between engine and gearbox for looseness, corrosion and damage
    4. 4Have a workshop load new software into the control module if the code is only present in the gearbox

    Symptome, die Sie bemerken können1

    • No noticeable symptoms for the driver

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.