VOLVO
TCM-U058803 - Invalid Data Received From Transmission Fluid Pump Module. General Failure Information. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures
System
Getriebesteuergerät (TCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (16)
- Volvo S60 (2011–)2012Nur Motor: D5204T3 · Nur Getriebe: TF-80SD
- Volvo S60 (2011–)2013–2014Nur Motor: B5204T8, B5204T9, D5204T3, D5204T7 · Nur Getriebe: TF-80SD
- Volvo S60 (2011–)2015Nur Motor: D5204T3, D5204T7 · Nur Getriebe: TF-80SD
- Volvo S80 (2007–)2012, 2015Nur Motor: D5204T3 · Nur Getriebe: TF-80SD
- Volvo S80 (2007–)2013–2014Nur Motor: D5204T3, D5204T7 · Nur Getriebe: TF-80SD
- Volvo V40 (2013–)2013Alle Motoren außer: B4164T, B4164T3, D4162T · Nur Getriebe: TF-80SD
- Volvo V40 (2013–)2014Alle Motoren außer: B4164T, B4164T3, B4164T4, D4162T · Nur Getriebe: TF-80SD
- Volvo V40 (2013–)2015Nur Motor: B5204T8, B5204T9, D5204T6 · Nur Getriebe: TF-80SD
- Volvo V40 Cross Country (2013–)2013–2014Alle Motoren außer: B4164T, D4162T · Nur Getriebe: TF-80SD, TF-80SD AWD
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, B4204T11, D4162T, D4204T14 · Nur Getriebe: TF-80SD, TF-80SD AWD
- Volvo V60 (2011–)2012Nur Motor: D5204T3 · Nur Getriebe: TF-80SD
- Volvo V60 (2011–)2013–2014Nur Motor: B5204T8, B5204T9, D5204T3, D5204T7, D82PHEV · Nur Getriebe: TF-80SD
- Volvo V60 (2011–)2015Nur Motor: B5204T9, D5204T3, D5204T7, D82PHEV, D87PHEV · Nur Getriebe: TF-80SD
- Volvo V70 (2008–)2012Nur Motor: D5204T3 · Nur Getriebe: TF-80SD
- Volvo V70 (2008–)2013–2015Nur Motor: D5204T3, D5204T7 · Nur Getriebe: TF-80SD
- Volvo XC60 (2009–)2015Nur Motor: B5204T9 · Nur Getriebe: TF-80SD AWD
Was bedeutet der Fehlercode?
The transmission control module (TCM) receives faulty signals from the electric transmission oil pump. The pump maintains pressure and flow in the gearbox while the automatic engine start-stop function is active, and when the signal is faulty the TCM can switch that function off. The fault lies either in the connector or wire to the pump, or in the pump itself.
Mögliche Ursachen
- Damaged connector or wire to the oil pump
- Internal fault in the electric oil pump
Was Sie tun können
- 1Check that the connector to the gearbox electric oil pump is tight and free from corrosion and damage
- 2Check that the wiring between the gearbox control module and the oil pump is not chafed or broken
- 3If nothing can be found, clear the code and see whether it returns
- 4If the fault returns, a workshop needs to assess whether the electric oil pump should be replaced
Symptome, die Sie bemerken können1
- Automatic engine start-stop does not work, both when driving and at idle
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.