Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    UEM-0007
    VOLVO

    UEM-0007 - Reading lamp. Signal too low

    System

    Dachmodul (UEM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    1 Modell

    XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (1)
    • Volvo XC90 (2003–)2003–2015

    Was bedeutet der Fehlercode?

    The UEM monitors the buttons for the third-row reading lamps. The buttons share the same signal wire. The code is set when the signal from the buttons is too low, which happens when a button has stuck in the pressed position or the signal wire is short-circuited to ground.

    Mögliche Ursachen

    • A switch for the third-row reading lamp has jammed in the depressed position
    • The signal wire for the third-row reading lamp buttons is short-circuited to ground

    Was Sie tun können

    1. 1Check whether any of the buttons for the third-row reading lamps has stuck in the pressed position.
    2. 2Read off the code, clear it and check whether it returns once the buttons are released.
    3. 3Use a multimeter to check that the signal wire to the buttons has no contact with ground (the bodywork).
    4. 4Check that the fuses for the interior lighting are intact.
    5. 5If the fault remains, have a workshop check the wire and the upper electronic module.

    Symptome, die Sie bemerken können1

    • The interior lighting does not work

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.