VOLVO
UEM-0014 - Movement sensor. Internal fault
System
Dachmodul (UEM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellXC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (1)
Was bedeutet der Fehlercode?
On the XC90 the code applies to the front movement sensor. The fault can come from poor contact in the sensor or on the control module side, a break in the sensor communication cable, a short to voltage in that cable, or a defective sensor.
Mögliche Ursachen
- Poor contact on the sensor side and/or on the control module side
- Break in the sensor communication cable
- Short to voltage in the sensor communication cable
- Defective sensor
Was Sie tun können
- 1Read off the code, clear it and check whether it returns.
- 2Look for loose connectors and oxidation at the front sensor and at the control module connector.
- 3Use a multimeter to check that the communication cable to the front sensor has no contact with voltage.
- 4Also check the connector in the cable harness between the control module and the front sensor.
- 5If no fault is found, have a workshop replace the sensor.
Symptome, die Sie bemerken können1
- The alarm does not respond to the movement sensor
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.