VOLVO
BCM-0032 - Left rear wheel sensor. Faulty signal
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
Was bedeutet der Fehlercode?
The brake control module (BCM) has registered that the signal from the left rear wheel sensor is disturbed or interrupted on many occasions. The cause may be a loose sensor, damaged wiring, a defective tone ring or dirt. The code can be diagnosed while the car is rolling.
Mögliche Ursachen
- Loose wheel sensor
- Damaged wiring
- Defective tone ring
- Dirt between the tone ring and the wheel sensor
Was Sie tun können
- 1Check that the wheel sensor sits firmly against the spindle or hub and that there is no dirt between sensor and mounting face
- 2Check that the tone ring is securely fitted and complete, with no scratches or deformation
- 3Check the connectors at the brake control module and the rear wheel sensor for contact resistance and oxidation, and check the wiring for damage
- 4Clear the code and road test to see whether it returns
- 5The brake system is safety critical: do not replace the brake control module because of this code; have a workshop repair the sensor or tone ring
Symptome, die Sie bemerken können5
- ABS warning lamp on
- General warning lamp on
- No ABS function
- Traction control and anti-skid do not work
- With an intermittent fault the ABS lamp may only go out some way into the next drive
Was der Fehler beeinflussen kann3
- ABS is disabled
- Traction control, stability control, active yaw control (AYC) and brake assist are disabled
- Electronic brake force distribution (EBD) is disabled if two or more wheel sensors have failed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.