Volvo S80 (1999–2006) – Fehlercodes Bremssteuergerät (BCM)
71 Fehlercodes
Derselbe Fehlercode kann je nach Modelljahr und Motor unterschiedliche Bedeutungen haben. Jede Bedeutung steht deshalb in einer eigenen Zeile, mit genau den Fahrzeugen, für die sie gilt.
Die Fehlercodebeschreibungen liegen auf Schwedisch und Englisch vor und werden hier auf Englisch angezeigt.
| Code | Bedeutung |
|---|---|
| BCM-0010 | Left front wheel sensor. Signal missing2002–2006 |
| BCM-0011 | Wheel sensor left front. Faulty signal2002–2006 |
| BCM-0012 | Left front wheel sensor. Faulty signal2002–2006 |
| BCM-0020 | Right front wheel sensor. Signal missing2002–2006 |
| BCM-0021 | Wheel sensor right front. Faulty signal2002–2006 |
| BCM-0022 | Right front wheel sensor. Faulty signal2002–2006 |
| BCM-0030 | Left rear wheel sensor. Signal missing2002–2006 |
| BCM-0031 | Wheel sensor left rear. Faulty signal2002–2006 |
| BCM-0032 | Left rear wheel sensor. Faulty signal2002–2006 |
| BCM-0040 | Right rear wheel sensor. Signal missing2002–2006 |
| BCM-0041 | Wheel sensor right rear. Faulty signal2002–2006 |
| BCM-0042 | Right rear wheel sensor. Faulty signal2002–2006 |
| BCM-0050 | Control module. Faulty signal2002–2006 |
| BCM-0052 | Control module. Internal fault2002–2006 |
| BCM-0057 | Power supply. Voltage too low2002–2006 |
| BCM-0058 | Power supply. Voltage too high2002–2006 |
| BCM-0061 | Brake discs. Temperature too high2002–2006 |
| BCM-0065 | Stop lamp switch. Faulty signal2002–2006 |
| BCM-0068 | Sensor power supply. Faulty signal2002–2006 |
| BCM-0070 | Power supply for the pump motor. Faulty signal2002–2006 |
| BCM-0071 | Pump motor. Signal missing2002–2006 |
| BCM-0072 | Pump motor. Mechanical fault2002–2006 |
| BCM-0074 | Hydraulic valves. Faulty signal2002–2006 |
| BCM-0076 | Control module. Faulty configuration2002–2006 |
| BCM-0080 | Lateral accelerometer. Incorrect offset value2002–2006 |
| BCM-0081 | Accelerometer. Incorrect offset value2002–2006 |
| BCM-0082 | Yaw rate sensor. Incorrect offset value2002–2006 |
| BCM-0083 | Angle of lean sensor. Incorrect offset value2005–2006 |
| BCM-0090 | Lateral accelerometer. Faulty signal2002–2006 |
| BCM-0091 | Accelerometer. Faulty signal2002–2006 |
| BCM-0092 | Yaw rate sensor. Faulty signal2002–2006 |
| BCM-0093 | Angle of lean sensor. Faulty signal2005–2006 |
| BCM-0094 | Communication between control units Communication problems with DEM2002–2006 |
| BCM-0095 | Communication between control units Communication problems with DEM2002–2006 |
| BCM-0097 | Communication between control modules. Communication problems with the central electronic module (CEM)2002–2006 |
| BCM-0100 | Communication between control modules. Communication problems with the engine control module (ECM)2002–2006 |
| BCM-0101 | Communication between control modules. Communication problems with the engine control module (ECM)2002–2006 |
| BCM-0103 | Pedal position sensor. Faulty signal2002–2006 |
| BCM-0106 | Steering wheel or wheel alignment. Incorrect steering wheel or wheel alignment2002–2006 |
| BCM-0108 | Communication between control modules. Communication with the steering angle sensor. Control module not initiated2002–2006 |
| BCM-0109 | Communication between control modules. Communication with the steering angle sensor. Internal fault2002–2006 |
| BCM-0111 | Communication between control modules. Check of the steering angle sensor tolerances has not been run2002–2006 |
| BCM-0112 | Active yaw control sensor. Sensor not calibrated2002–2006 |
| BCM-0113 | Back-up (reversing) signal. Signal missing2002–2006 |
| BCM-0114 | Communication with the active yaw control sensor. Signal missing2002–2006 |
| BCM-0115 | Communication between control modules. Communication with the steering angle sensor. Signal missing2002–2006 |
| BCM-0116 | Communication with the active yaw control sensor. Communication problems2002–2006 |
| BCM-0117 | Communication with the active yaw control sensor. An incorrect active yaw control sensor had been installed2002–2006 |
| BCM-0118 | Power supply for the active yaw control sensor. Voltage too high2002–2006 |
| BCM-0119 | Power supply for the active yaw control sensor. Voltage too low2002–2006 |
| BCM-0121 | Yaw rate sensor. Signal outside its permitted range2002–2006 |
| BCM-0123 | Active yaw control sensor. Internal fault2002–2006 |
| BCM-0125 | Lateral accelerometer. Signal outside its permitted range2002–2006 |
| BCM-0127 | Angle of lean sensor. Signal outside its permitted range2005–2006 |
| BCM-0129 | Longitudinal accelerometer. Signal outside its permitted range.2002–2006 |
| BCM-0130 | Brake pressure sensor 1. Signal too low2002–2006 |
| BCM-0133 | Brake pressure sensor 2. Signal too low2002–2006 |
| BCM-0136 | Brake pressure sensor 1 and 2. Signal outside its permitted range2002–2006 |
| BCM-0138 | Power supply for the active yaw control sensor. Faulty voltage2002–2006 |
| BCM-0139 | Pressure build-up valve, power brake booster. Signal outside its permitted range2002–2006 |
| BCM-0140 | Pedal pressure sensor. Signal outside its permitted range2002–2006 |
| BCM-0145 | Stability control. Stability control has been active for too long2002–2006 |
| BCM-0147 | Pedal position sensor. Signal outside its permitted range2002–2006 |
| BCM-0148 | Communication between control modules. Faulty configuration ID2002–2006 |
| BCM-0150 | Stop lamp switch. Signal outside its permitted range2002–2006 |
| BCM-0151 | Control module. Internal memory fault2002–2006 |
| BCM-A030 | Communication between control modules. Steering angle sensor. Initialization check not run2002–2006 |
| BCM-A031 | Communication between control modules. Steering angle sensor. Tolerance check not run2002–2006 |
| BCM-A032 | Stability function. Too long stability control2003–2006 |
| BCM-E000 | Control module communication. Faulty communication2002–2006 |
| BCM-E003 | Configuration fault. Faulty configuration2002–2006 |