Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    BCM-0136
    VOLVO

    BCM-0136 - Brake pressure sensor 1 and 2. Signal outside its permitted range

    System

    Bremssteuergerät (BCM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    5 Modelle

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (11)
    • Volvo S60 (2001–2009)2002–2009
    • Volvo S80 (1999–2006)2002–2006
    • Volvo V70 (2000–2008)2002–2008
    • Volvo V70 XC / XC70 (2001–2007)2002–2007
    • Volvo XC90 (2003–)2003–2004, 2015
    • Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
    • Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
    • Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
    • Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
    • Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
    • Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9

    Was bedeutet der Fehlercode?

    Brake pressure sensors 1 and 2 give the brake control module information about the pressure in the brake system. The code is set when the module judges that the signal from one of the sensors is implausible. The fault may come from a broken earth wire, a fault in the brake circuit or a damaged sensor.

    Mögliche Ursachen

    • Open circuit in the earth wire
    • Fault in the brake circuit
    • Defective pressure sensor

    Was Sie tun können

    1. 1Check the earth wires to the pressure sensors and the brake control module for breaks and corrosion
    2. 2Read the brake system pressure with diagnostic equipment while the brake pedal is pressed
    3. 3As the wires can be swapped during fitting, both sensors should be checked
    4. 4The brake system is safety critical: do not work on the brake system yourself, and have a workshop repair the fault

    Symptome, die Sie bemerken können5

    • Anti-spin warning lamp on
    • General yellow warning lamp on
    • Anti-spin does not work
    • Stability function does not work
    • Anti-skid does not work

    Was der Fehler beeinflussen kann1

    • Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.