VOLVO
BCM-0050 - Control module. Faulty signal
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
Was bedeutet der Fehlercode?
The brake control module (BCM) has registered an internal problem, for example interference or an open circuit in the circuit to the hydraulic valves. Interference may have affected the module's calculations, so the code can be set even when the fault is not visible right now.
Mögliche Ursachen
- Electrical interference that has affected the module's calculations
- Fault inside the brake control module (BCM)
Was Sie tun können
- 1Read the codes and deal with any other stored codes first, as they may share the same cause
- 2Clear the code and check whether it returns; if it does not come back, no further action is needed
- 3Check the brake control module connector for contact resistance and oxidation, and make sure the wiring is not close to interference sources such as mobile phones
- 4If the fault remains as permanent, have a workshop replace the brake control module
- 5The brake system is safety critical: drive carefully until the fault is fixed, as ABS and stability control are out of action
Symptome, die Sie bemerken können5
- General warning lamp on
- ABS warning lamp on
- The brake circuit does not work and the warning lamp comes on
- ABS, traction control, stability and anti-skid do not work
- Traction control does not work
Was der Fehler beeinflussen kann3
- ABS is disabled
- Electronic brake force distribution (EBD), traction control, stability control and brake assist are disabled
- Active yaw control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.