VOLVO
BCM-0148 - Communication between control modules. Faulty configuration ID
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
Was bedeutet der Fehlercode?
The steering angle sensor module (SAS) and the steering wheel module (SWM) send data to the brake control module in small packets, and each packet has an identifier number. The code is set if the brake control module receives an identifier that does not match the one it expects. The code may be stored when the brake control module is programmed.
Mögliche Ursachen
- Interference or intermittent breaks on the CAN network
- Internal fault in the steering angle sensor module (SAS)
- Fault inside the steering wheel module (SWM)
Was Sie tun können
- 1Clear the code if it was set during programming of the brake control module, and check that it does not return
- 2Read the codes in the steering angle sensor module and the steering wheel module and fault-find according to them
- 3Check the CAN communication with diagnostic equipment, and replace the steering angle sensor module if it is faulty
- 4The brake system is safety critical: do not replace the brake control module for this code, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können5
- Anti-spin warning lamp on
- General yellow warning lamp on
- Anti-spin does not work
- Stability function does not work
- Anti-skid does not work
Was der Fehler beeinflussen kann1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.