VOLVO
BCM-0072 - Pump motor. Mechanical fault
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
Was bedeutet der Fehlercode?
The brake control module (BCM) has registered that the ABS pump motor does not start. The pump motor is needed to build up brake pressure during ABS regulation.
Mögliche Ursachen
- Poor contact in the connections
- Defective fuse for the pump motor
- Open circuit in the voltage supply to the pump motor
- Open circuit in the pump motor's ground wire
- Defective pump motor
- Fault in the brake control module
Was Sie tun können
- 1Check the pump motor fuse in the engine bay relay and fuse box
- 2Check the connectors at the brake control module and the pump motor for contact resistance and oxidation
- 3Run the pump motor with diagnostic equipment and check that it starts and runs as it should
- 4The brake system is safety critical: do not work on the hydraulic unit or pump motor yourself; have a workshop repair the fault
Symptome, die Sie bemerken können5
- General warning lamp on
- ABS warning lamp on
- ABS and anti-skid do not work
- Stability function does not work
- Traction control does not work and the information lamp is on
Was der Fehler beeinflussen kann1
- ABS, traction control, stability control, active yaw control (AYC) and brake assist are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.