BCM-0111
VOLVO
BCM-0111 - Communication between control modules. Check of the steering angle sensor tolerances has not been run
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
Was bedeutet der Fehlercode?
The brake control module registers that the wheel or steering alignment is incorrect, so the check of the steering angle sensor tolerances has not been carried out. The code is set in that case.
Mögliche Ursachen
- Incorrect wheel or steering alignment
- Defective steering angle sensor
Was Sie tun können
- 1Have a workshop check the wheel and steering alignment and adjust them if needed
- 2Check that the steering angle sensor is correctly fitted and undamaged
- 3The brake system is safety critical: do not replace the brake control module for this code, and drive carefully until the fault is fixed
Symptome, die Sie bemerken können5
- Anti-spin warning lamp on
- General yellow warning lamp on
- Anti-spin does not work
- Stability function does not work
- Anti-skid does not work
Was der Fehler beeinflussen kann1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.