VOLVO
BCM-0093 - Angle of lean sensor. Faulty signal
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2001–2009)2005–2009
- Volvo S80 (1999–2006)2005–2006
- Volvo V70 (2000–2008)2005–2008
- Volvo V70 XC / XC70 (2001–2007)2005–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
Was bedeutet der Fehlercode?
Applies only to cars fitted with DSTC and RSC. The lean angle sensor in the AYC sensor measures the car's lean from side to side and sends the value to the brake control module. The code is set when the signal is faulty, which is due to an open circuit or short to ground in the wiring or to an internal fault in the AYC sensor.
Mögliche Ursachen
- Open circuit or short to ground in the wiring to the AYC sensor
- Internal fault in the AYC sensor
Was Sie tun können
- 1Check the wiring between the connector and the AYC sensor for open circuits and short circuits to ground
- 2Read the lean angle sensor value with diagnostic equipment
- 3If the value is wrong, the AYC sensor may need replacing by a workshop
- 4The brake system is safety critical: do not replace the brake control module for this code, and do not work on the stability sensor yourself
Symptome, die Sie bemerken können3
- Anti-spin does not work
- Stability function does not work
- Anti-skid does not work
Was der Fehler beeinflussen kann2
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
- Roll stability control (RSC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.