VOLVO
BCM-0103 - Pedal position sensor. Faulty signal
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
Was bedeutet der Fehlercode?
The pedal position sensor tells the brake control module how far the brake pedal is pressed and how quickly. The module uses this to activate active brake assist during an emergency stop. The code is set when the sensor signal is faulty.
Mögliche Ursachen
- Open circuit in the signal or supply wire
- Wires shorted to ground or supply voltage
- Incorrectly fitted or damaged sensor
- Fault inside the brake control module (BCM)
Was Sie tun können
- 1Check the connectors at the brake control module and the pedal position sensor for contact resistance and oxidation
- 2Read the pedal sensor position and signal with diagnostic equipment while the pedal is pressed and released
- 3Check the wiring between the pedal position sensor and the brake control module for open circuits and short circuits
- 4The brake system is safety critical: do not work on the brake pedal sensor yourself, and have a workshop repair the fault
Symptome, die Sie bemerken können2
- General warning lamp on
- Traction control does not work
Was der Fehler beeinflussen kann2
- Active brake assist (BA) is disabled
- Traction control on the rear wheels is lost on cars with TRACS, but front-wheel control still works
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.