VOLVO
BCM-0147 - Pedal position sensor. Signal outside its permitted range
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
Was bedeutet der Fehlercode?
The pedal position sensor gives the brake control module information about the brake pedal position and how quickly the pedal is pressed. These signals are needed to judge how much braking force is required, and on cars without active brake assist they are also used to check the brake light switch. The code is set when the signal from the sensor is implausible.
Mögliche Ursachen
- Open circuit in the wiring
- Wiring shorted to ground or supply voltage
- Incorrectly fitted pedal position sensor
- Defective pedal position sensor
- Defective brake control module
Was Sie tun können
- 1Check that the connectors at the brake control module and the pedal position sensor are secure and free from oxidation
- 2Check that the pedal position sensor is correctly fitted and undamaged
- 3Read the codes in the engine control module and the central electronic module, as codes for the brake light switch may be stored there
- 4The brake system is safety critical: do not work on the pedal position sensor yourself, and have a workshop repair the fault
Symptome, die Sie bemerken können1
- General yellow warning lamp on
Was der Fehler beeinflussen kann2
- Active brake assist (BA) is disabled
- Traction control (TC) on the rear wheels is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.