VOLVO
BCM-0083 - Angle of lean sensor. Incorrect offset value
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2001–2009)2005–2009
- Volvo S80 (1999–2006)2005–2006
- Volvo V70 (2000–2008)2005–2008
- Volvo V70 XC / XC70 (2001–2007)2005–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
Was bedeutet der Fehlercode?
Applies only to cars fitted with DSTC. The lean angle sensor, which is fitted on cars with RSC, measures the car's lean from side to side and is built into the AYC sensor. The code is set when the sensor's offset correction value is wrong, and the fault is most often due to how the AYC sensor is fitted.
Mögliche Ursachen
- AYC sensor incorrectly fitted
- AYC sensor loose
- Bracket of the AYC sensor bent
- Internal fault in the AYC sensor
Was Sie tun können
- 1Check that the AYC sensor is firmly fitted and correctly mounted on the bracket under the front passenger seat
- 2Make sure the bracket has not been bent or damaged in some other way
- 3The brake system is safety critical: do not replace the brake control module for this code, and have a workshop repair the sensor or bracket
Symptome, die Sie bemerken können3
- Anti-spin does not work
- Stability function does not work
- Anti-skid does not work
Was der Fehler beeinflussen kann2
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
- Roll stability control (RSC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.