VOLVO
BCM-E000 - Control module communication. Faulty communication
System
Bremssteuergerät (BCM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (20)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Nur Motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle Motoren außer: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Alle Motoren außer: B6324S5
Was bedeutet der Fehlercode?
Control modules in the car send and receive information continuously over the CAN data network. The brake control module (BCM) has registered a serious disturbance that blocks the communication, and the module cannot then be reached. The code can therefore only be read out when the fault is intermittent.
Mögliche Ursachen
- Short circuit between the CAN wires
- Open circuit in one of the CAN wires
- Internal fault in the brake control module
- Internal fault in another module on the same part of the CAN network
- Interference on the CAN network
Was Sie tun können
- 1Read codes in the central electronic module; if communication fault codes are stored there, troubleshoot those first
- 2Measure the CAN wires against ground, against supply voltage and against each other, looking for shorts and open circuits
- 3Have a workshop disconnect modules sharing the network one at a time to see which one disturbs it, as the fault may lie in another module
- 4Repair the wiring, or replace the module that is communicating incorrectly
- 5The brake system is safety-critical, so have a workshop carry out all work on the communication and the module
Symptome, die Sie bemerken können5
- ABS warning lamp lit
- ABS does not work
- Message in the text display
- Brake circuit warning lamp lit
- Traction control warning lamp lit
Was der Fehler beeinflussen kann3
- The module switches itself off and stays off until the power supply is broken and restored
- Traction control and stability control are disabled
- Dynamic stability control (AYC) is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.