CPM-B1D3194
VOLVO
CPM-B1D3194 - Flame detected prior to normal operation. Component Failures. Unexpected operation
System
Verbrennungsheizung (CPM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
Was bedeutet der Fehlercode?
The fault code says a flame is registered too early, but in practice it means the combustion chamber is too hot even though the flame should be out. The control module switches the heater off and sets the fault code when the maximum ventilation time has been exceeded. Causes may be a blocked exhaust or intake system, a damaged flame sensor or a damaged fan.
Mögliche Ursachen
- Blocked intake or exhaust system
- Damaged flame sensor
- Damaged combustion fan
- Defective cables and connections to the glow plug
- Damaged glow plug
Was Sie tun können
- 1Look over the air inlet and exhaust pipe for blockages such as leaves, snow or dirt, and clear whatever is blocking them.
- 2Check that the exhaust system is sealed. If there is leakage at a clamp, tighten the clamp or replace the part.
- 3Look for corrosion, damage and loose connections at the glow plug and at the fan connector. Replace the glow plug if its connector or cable is damaged.
- 4If you have a diagnostic tool: activate the heater fan and listen for a buzzing sound. If no sound is heard, the fan is probably damaged.
- 5If the fault remains, have a workshop update the software in the auxiliary heater and investigate further.
Symptome, die Sie bemerken können3
- Poor heating in the cabin
- The parking or auxiliary heater does not work when it is activated
- The parking heater does not work
Was der Fehler beeinflussen kann2
- The heater is switched off when ventilation takes too long
- The heater's function is blocked after several start attempts
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.