VOLVO
SAS-000F - Steering wheel angle sensor. Internal fault
System
Lenkwinkelsensor (SAS)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2001–2009)2005–2009
- Volvo S80 (1999–2006)2005–2006
- Volvo V70 (2000–2008)2005–2008
- Volvo V70 XC / XC70 (2001–2007)2005–2007
- Volvo XC90 (2003–)2005–2006Alle Motoren außer: B8444S
- Volvo XC90 (2003–)2007Nur Motor: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Alle Motoren außer: B6324S, B8444S
- Volvo XC90 (2003–)2011Alle Motoren außer: B6324S5, B8444S
- Volvo XC90 (2003–)2012Alle Motoren außer: B6324S5
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
A fault inside the steering wheel angle sensor means the signals it reads from the code wheel do not agree with each other. The fault disconnects the stability control function. The sensor is fitted to the underside of the contact reel and is changed together with that part.
Mögliche Ursachen
- Fault inside the steering wheel angle sensor
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Turn the steering wheel fully to the right, then fully to the left, and read the code again
- 3If you have a diagnostic tool, follow the counters for the fault status: many incorrect driving cycles point to a recurring fault, few to a temporary one
- 4If the fault returns, have a workshop replace the contact reel with the steering wheel angle sensor, and the steering wheel module (SWM) if it still returns
- 5The stability system is off while the fault is present, so have a workshop repair it promptly
Symptome, die Sie bemerken können1
- Anti-spin warning lamp is on
Was der Fehler beeinflussen kann1
- Stability function blocked
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.