VOLVO
ABS-0076 - Control module. Faulty configuration
Układ
Układ hamulcowy (ABS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The ABS control module, which also handles stability control, is programmed at the factory for several car models and configures itself to the car's model and equipment the first time the ignition is switched on. If a module that was fitted to another car model has been installed, for example during a repair, the configuration can be wrong and the code is set.
Możliwe przyczyny
- An ABS control module from another car model has been fitted
- A central electronic module (CEM) from another car model has been fitted
Co możesz zrobić
- 1First check the central electronic module (CEM), since an incorrectly configured CEM can affect the ABS module's configuration; trace any codes stored in the CEM first
- 2Clear the codes and check that they do not return
- 3Have a workshop reset and configure the ABS control module with the correct car model selected
- 4Afterwards, check that the configuration is correct for the car and that the functions work
- 5ABS is safety-critical – do not work on the ABS control module's configuration yourself, have a workshop do it
Objawy, które możesz zauważyć4
- Traction control does not work
- Stability control does not work
- ABS warning lamp flashes
- Traction control warning lamp lit
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.