VOLVO
ABS-00A2 - Side acceleration sensor. Signal faulty. Intermittent fault
Układ
Układ hamulcowy (ABS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The lateral acceleration sensor tells the ABS control module how strong the car's sideways acceleration is. The code applies only to cars with stability control. At some point the module received a faulty signal, and the fault is intermittent, meaning temporary. While it lasts, anti-spin and the stability function are blocked.
Możliwe przyczyny
- Open circuit in the wiring
- Wiring shorted to ground or supply voltage
- Sensor incorrectly fitted
- Faulty sensor or, less commonly, a faulty control module
Co możesz zrobić
- 1Check that the sensor is correctly fitted and firmly secured in its bracket
- 2Check the connector at the control module and at the lateral acceleration sensor for contact resistance and oxidation
- 3Follow the wire to the sensor and look for intermittent open circuits or shorts to ground or supply voltage
- 4Remedy as necessary, clear the code and road test
- 5ABS and stability control are safety-critical – do not work on the ABS module or the brake system yourself, have a workshop do it
Objawy, które możesz zauważyć3
- Anti-spin does not work
- Stability function is absent
- Anti-spin warning lamp lit
Na co może wpływać usterka2
- Anti-spin function is blocked
- Stability function is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.