VOLVO
ABS-00B6 - Communication control unit Internal fault in CAN or SAS
Układ
Układ hamulcowy (ABS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The ABS module has not picked up the reading from the steering angle sensor, which the SAS module puts onto the data network. The cause can be disturbances on the data network or an internal fault in the steering angle sensor control unit. This code applies only to cars with stability control, and anti-spin and stability are blocked.
Możliwe przyczyny
- Disturbances on the CAN network
- Internal fault in the steering wheel angle sensor (SAS) control unit
Co możesz zrobić
- 1Read the codes in the central electronic module (CEM) and in the steering angle sensor control unit
- 2Troubleshoot according to the codes in those systems
- 3Check the battery and its terminals, since voltage problems can disturb the data network
- 4If the fault remains, have a workshop with diagnostic equipment check the data network and the steering angle sensor control unit
- 5ABS, stability and steering are safety-critical – do not work on these systems yourself, have a workshop do it
Objawy, które możesz zauważyć3
- Anti-spin does not work
- Stability function is absent
- Anti-spin warning lamp lit
Na co może wpływać usterka2
- Anti-spin function is blocked
- Stability function is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.