VOLVO
ABS-00C2 - Reversing signal. Unreasonable signal
Układ
Układ hamulcowy (ABS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The reversing signal tells the ABS control module that the car is in reverse. The module has registered a signal that does not fit the other conditions, so the code is set. This code applies only to cars with stability control, and anti-spin and stability are blocked while it is present.
Możliwe przyczyny
- Faulty signal from the reversing light sensor or switch
- Short or open circuit in the reversing signal wire
- Faulty ABS control module
Co możesz zrobić
- 1Check that the reversing lights work when reverse gear is selected
- 2Check the connectors at the gear selector and the reversing signal for poor contact and oxidation
- 3Follow the reversing signal wire and look for an open circuit or a short to ground or supply voltage
- 4Clear the code and road test in reverse to see whether it returns
- 5If the fault remains, have a workshop with diagnostic equipment check the signal and the ABS control module
- 6ABS and stability control are safety-critical – do not work on the ABS module or the brake system yourself, have a workshop do it
Objawy, które możesz zauważyć3
- Anti-spin does not work
- Stability function is absent
- Anti-spin warning lamp lit
Na co może wpływać usterka2
- Anti-spin function is blocked
- Stability function is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.