VOLVO
ADM-0002 - Level sensor, additive. Faulty signal
Układ
Moduł dozowania dodatku do paliwa (ADM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (8)
- Volvo C30 (2007–2013)2007–2010Tylko silnik: D4164T, D4204T
- Volvo C30 (2007–2013)2011Tylko silnik: D4164T
- Volvo C70 (2006–2013)2008–2010Tylko silnik: D4204T
- Volvo S40 (2004–2013)2005–2010Tylko silnik: D4164T, D4204T
- Volvo S40 (2004–2013)2011Tylko silnik: D4164T
- Volvo V50 (2004–2013)2005–2006Tylko silnik: D4164T, D4204T, D4204T2
- Volvo V50 (2004–2013)2007–2010Tylko silnik: D4164T, D4204T
- Volvo V50 (2004–2013)2011Tylko silnik: D4164T
Co oznacza ten kod błędu?
The additive dosing module (ADM) monitors the level sensor in the additive tank. If the module receives a signal from the sensor that is faulty or implausible, the code is set. The sensor is built into the additive tank and cannot be replaced on its own.
Możliwe przyczyny
- Poor contact, resistance or corrosion at the terminals
- Break in the signal wire, or a short to ground or to supply voltage
- Damaged additive level sensor
- Damaged additive dosing module (ADM)
Co możesz zrobić
- 1Check the connector at the additive tank for looseness, contact resistance and oxidation
- 2Clear the code and see whether it returns; a single fault can be a temporary disturbance
- 3If the code returns with no visible cause, the additive tank may need replacing because the sensor is built into it
- 4Restart the module with diagnostic equipment after any repair
- 5After the repair, check that the code does not come back
Objawy, które możesz zauważyć3
- Message in the text window of the display
- Yellow warning symbol and text message in the display
- Maintenance or service indication in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.