Co oznacza kod błędu ADM-E000?

Diagnostyka i definicja kodu błędu dla ADM-E000 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C70 (2006–2013)). Zamów naprawę w OBD Tuning.

VOLVO

ADM-E000 - Control module. Faulty communication

Układ

Moduł dozowania dodatku do paliwa (ADM)

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

4 modele

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Pokaż modele wg rocznika i silnika (9)

Co oznacza ten kod błędu?

The additive dosing module (ADM) has registered serious interference on the high-speed CAN network, so its communication is blocked. The module then shuts itself down until the power supply is disconnected. Because it cannot communicate, the code can only be read if the fault is intermittent.

Możliwe przyczyny

Short circuit between the CAN wires
Open circuit in one of the CAN wires
Internal fault in the control module
Internal fault in another control module on the same part of the CAN network

Co możesz zrobić

1Read the codes in the central electronic module (CEM), since it monitors the voltage on the CAN wires
2Check the battery and its terminals so the voltage is stable
3With diagnostic equipment measure the CAN network and look for breaks and shorts
4Do not replace the central electronic module for a CAN fault unless fault-finding shows it is faulty
5Clear the codes after the repair and check that they do not return

Objawy, które możesz zauważyć1

No clear symptoms for the driver

Na co może wpływać usterka2

The module shuts itself off and stays off until the power supply is disconnected
No communication with the other control modules on the network

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.