VOLVO
ADM-U030000 - Internal Control Module Software Incompatibility. General Failure Information. No sub type information
Układ
Moduł dozowania dodatku do paliwa (ADM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The additive dosing module (ADM) has registered that its software does not match the car's configuration. It checks its configuration ID against what the CEM sends on the CAN network, and the code is set on a mismatch or when communication with the CEM is broken. Because the module cannot communicate while the fault is active, the code can only be read if it is intermittent.
Możliwe przyczyny
- A wrongly matched configuration ID, for example from a second-hand module with other software or hardware
- Open circuit in the CAN wire between the module and the CEM
Co możesz zrobić
- 1Check whether the ADM module has recently been replaced, especially if it is second-hand, and whether the correct software was downloaded
- 2Read the codes in the CEM and deal with any communication faults first
- 3Check that the wire between the module and the CEM has no breaks and that the connectors are secure
- 4Have a workshop download the correct software if it does not match the car
- 5Clear the code and check that it does not return
Objawy, które możesz zauważyć1
- No clear symptoms for the driver
Na co może wpływać usterka1
- The module answers diagnostic commands, but normal CAN communication does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.