Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    AEM-E001
    VOLVO

    AEM-E001 - Control module communication. Faulty communication

    Układ

    Moduł akcesoriów elektronicznych (AEM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    10 modeli

    C30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (10)
    • Volvo C30 (2007–2013)2007–2013
    • Volvo C30 Electric (2011–2013)2011–2013
    • Volvo C70 (2006–2013)2006–2013
    • Volvo S40 (2004–2013)2004–2012
    • Volvo S60 (2001–2009)2001–2009
    • Volvo S80 (1999–2006)2001–2006
    • Volvo V50 (2004–2013)2004–2012
    • Volvo V70 (2000–2008)2001–2008
    • Volvo V70 XC / XC70 (2001–2007)2001–2007
    • Volvo XC90 (2003–)2003–2015

    Co oznacza ten kod błędu?

    The AEM has registered serious interference on the CAN communication, which blocks its communication. The module switches itself off (bus-off) and stays off until the power supply is disconnected. Because it cannot communicate, the code can only be read out if the fault is intermittent.

    Możliwe przyczyny

    • Short circuit between the CAN wires
    • Open circuit in one of the CAN wires
    • Internal fault in the control module
    • Fault in another control module on the same part of the network that disturbs traffic

    Co możesz zrobić

    1. 1Read the codes in the central electronic module (CEM) first, and trace any codes found there
    2. 2Measure the resistance and shorts in the CAN network with diagnostic equipment
    3. 3Check the battery and its terminals so the voltage is stable
    4. 4Do not replace the central electronic module for a CAN fault unless fault-finding shows an internal fault
    5. 5Clear the codes after the repair and check that they do not return

    Objawy, które możesz zauważyć1

    • Accessories connected to the module stop working

    Na co może wpływać usterka1

    • The module switches itself off (bus-off) and stays off until the power supply is disconnected

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.