VOLVO
AUD-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
Układ
Moduł audio (AUD)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The audio module (AUD) checks its configuration number against the vehicle signal settings broadcast by the central electronic module (CEM) on the CAN network. The code is set when communication with the CEM has been interrupted, so the audio module never received its initial configuration. It can usually only be read out if the fault is intermittent, and it is checked at start-up.
Możliwe przyczyny
- Break in the CAN network between the infotainment module (ICM) and the central electronic module (CEM)
- Break in the MOST network between the infotainment module (ICM) and the audio module (AUD)
- Central electronic module (CEM) not correctly configured
- Infotainment module (ICM) not passing the vehicle signal configuration on to the MOST network
- Audio module not intended for this car, for example a used unit with different software or hardware
Co możesz zrobić
- 1Read the codes in the central electronic module and the infotainment module, since they are often linked
- 2Check that the battery and its terminals are in good condition, since voltage drops can disturb the data network
- 3With diagnostic equipment check the CAN and MOST networks and the connectors between the units
- 4Have a workshop establish whether the fault lies in the network or in a module before any module is replaced
Objawy, które możesz zauważyć3
- The speakers do not work
- The sound profile for the driver's seat and for left- or right-hand drive may be wrong
- Other codes for the headphones may be incorrect while this code is set
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.