BCM-0105
VOLVO
BCM-0105 - Steering wheel, wheel alignment. Signal outside its permitted range
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Tylko silnik: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Tylko silnik: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
Co oznacza ten kod błędu?
The steering wheel module (SWM) sends steering angle sensor signals onto the CAN network, and the brake control module compares them with a calculated reference value. The reference is worked out from wheel speed signals, yaw rate and sideways acceleration. The code is set when the reference signal is outside its limit, which may come from wheel alignment or from the sensor.
Możliwe przyczyny
- Incorrect front axle alignment
- Steering angle sensor incorrectly fitted
- Damaged steering angle sensor
Co możesz zrobić
- 1Check whether codes are stored for the wheel sensors, the steering module or the stability sensor, and fault-find those first
- 2Have a workshop check and, if needed, adjust the front axle alignment before checking the steering angle
- 3Check that the steering angle sensor is correctly fitted and undamaged
- 4The brake system is safety critical: drive carefully until the fault is fixed, and do not work on the stability system yourself
Objawy, które możesz zauważyć3
- Information lamp on
- Traction control does not work
- Stability function does not work
Na co może wpływać usterka1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.