VOLVO
BCM-C002201 - Brake Booster Solenoid. General Failure Information. General electrical failure
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
14 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (21)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Wszystkie silniki oprócz: D82PHEV
- Volvo V60 (2011–)2015Wszystkie silniki oprócz: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Tylko silnik: B8444S
- Volvo XC90 (2003–)2007–2010Tylko silnik: B6324S, B8444S
- Volvo XC90 (2003–)2011Tylko silnik: B6324S5, B8444S
- Volvo XC90 (2003–)2012Tylko silnik: B6324S5
- Volvo XC90 (2003–)2013–2014Wszystkie silniki oprócz: B5254T9
Co oznacza ten kod błędu?
On cars with the DSTC stability system, the brake control module (BCM) controls a pre-pressure valve that admits air into the brake booster during stability control and anti-skid, so that brake pressure rises automatically. If the module receives a signal from the valve that it cannot accept as reasonable, the code is set.
Możliwe przyczyny
- Contact resistance or oxidation in connectors or joints
- Wires shorted to ground or to supply voltage
- Incorrectly fitted sensor
- Damaged pre-pressure valve
- Internal fault in the brake control module
Co możesz zrobić
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3Check the connectors at the brake control module and the pre-pressure valve for contact resistance and oxidation
- 4Check the wiring to the valve for breaks, chafing and short circuits to ground or supply voltage
- 5Activate the pre-pressure valve with diagnostic equipment and check that its status changes
- 6The braking system is safety critical: do not work on the pre-pressure valve or brake booster yourself; leave this to a workshop
Objawy, które możesz zauważyć5
- General warning lamp on
- Traction control does not work
- Stability function does not work
- Anti-skid function does not work
- Adaptive cruise control does not work
Na co może wpływać usterka1
- Traction control, stability control, active yaw control and brake assistance are blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.