VOLVO
BCM-C003101 - Left Front Wheel Speed Sensor. General Failure Information. General electrical failure
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (12)
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Tylko silnik: B8444S
- Volvo XC90 (2003–)2007–2010Tylko silnik: B6324S, B8444S
- Volvo XC90 (2003–)2011Tylko silnik: B6324S5, B8444S
- Volvo XC90 (2003–)2012Tylko silnik: B6324S5
- Volvo XC90 (2003–)2013–2014Wszystkie silniki oprócz: B5254T9
Co oznacza ten kod błędu?
The brake control module (BCM) has received a disturbed or interrupted signal from the left front wheel speed sensor many times. The sensor reads the wheel speed from a tone wheel, and the ABS and several stability functions use this information. The fault is electrical and most often lies in the wiring or the sensor connectors, but the sensor itself can also be the cause.
Możliwe przyczyny
- Contact resistance or oxidation in the connections
- Open or short circuit in the wires to the wheel sensor
- Damaged wheel speed sensor
- Wires shorted to each other
- Internal fault in the brake control module
Co możesz zrobić
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the battery is in good condition, as voltage drops can cause false signals
- 3Check the connector at the left front wheel sensor and at the brake control module for looseness, moisture and oxidation
- 4Follow the cable from the sensor into the wheel arch and look for chafing, pinching and loose clips
- 5Read the wheel speed with diagnostic equipment and check the wiring and sensor if the fault remains
- 6The braking system is safety critical: do not work on the sensor or the ABS system yourself, and drive carefully until the fault is fixed
Objawy, które możesz zauważyć5
- General warning lamp and ABS warning lamp on
- Brake system warning lamp on
- ABS, traction control and stability function do not work
- Adaptive cruise control and collision warning do not work
- Front monitoring and City Safety do not work
Na co może wpływać usterka2
- ABS, traction control, stability control and brake assistance are blocked
- Electronic brake force distribution is disabled if several wheel sensors stop working
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.