VOLVO
BCM-C00344A - Right Front Wheel Speed Sensor. System Internal Failures. Incorrect component installed
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
13 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (14)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2009–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2009–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2009–2015
Co oznacza ten kod błędu?
The brake control module (BCM) has found that an incorrect type of wheel sensor is fitted at the right front wheel. The module expects a particular sensor and therefore cannot interpret its signal correctly once the speed is above a certain level. The fault lies in the fitted component, not in the module.
Możliwe przyczyny
- Wrong type of wheel sensor fitted, for example after a repair or replacement
- Incorrect spare part used during earlier work on the car
Co możesz zrobić
- 1Check which type of wheel sensor is fitted at the right front wheel and whether it has recently been replaced
- 2Read and note the code, clear it and road test the car to see whether it returns
- 3Have a workshop fit the correct wheel sensor for the car and check its function afterwards
- 4After the repair, drive the car at a sufficient speed and check that the code does not return
- 5The braking system is safety critical: do not work on the wheel sensor or ABS system yourself; leave this to a workshop
Objawy, które możesz zauważyć5
- ABS indication shows a fault or no indication
- Anti-spin function does not work
- Stability function does not work
- Adaptive cruise control does not work
- Electronic parking brake has reduced function
Na co może wpływać usterka3
- ABS, traction control, stability control and brake assistance can be disabled
- Active yaw control (AYC) is blocked
- Roll stability control (RSC) is blocked on cars that have it
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.