VOLVO
BCM-C003A29 - Right Rear Wheel Speed Sensor. General Signal Failures. Signal signal invalid
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
On the V60, the brake control module (BCM) receives speed information from four wheel sensors. The signal from the right rear wheel sensor is missing, or it shows too low a speed, so the module treats the signal as invalid. The speed data for that wheel is then missing for ABS and the stability functions.
Możliwe przyczyny
- Damaged wiring to the right rear wheel sensor
- Damaged right rear wheel sensor
Co możesz zrobić
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Look for damage in the wiring to the right rear wheel sensor, particularly in the wheel arch
- 3Check that the right rear wheel sensor is undamaged and secure
- 4Read the wheel speed with diagnostic equipment and replace the wiring or sensor as needed
- 5The braking system is safety critical: do not work on the ABS system yourself; leave this to a workshop, and drive carefully until the fault is fixed
Objawy, które możesz zauważyć5
- ABS does not work or activates suddenly
- Anti-spin function does not work
- Hill descent assist does not work
- Hill start assist does not work
- Front monitoring and active safety do not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.