VOLVO
BCM-C005128 - Steering Wheel Position Sensor. General Signal Failures. Signal bias level out of range / zero adjustment failure
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
13 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (14)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Co oznacza ten kod błędu?
The brake control module (BCM) compares the steering angle from the steering angle sensor with a calculated correction value for the sensor's individual deviation. When the calculated value conflicts with where the wheel is pointing, the code is set. The fault most often comes from the steering wheel or front axle not being set up correctly, not from the brake control module.
Możliwe przyczyny
- Steering wheel incorrectly fitted
Co możesz zrobić
- 1Make sure the front axle is correctly aligned and that the steering wheel is correctly fitted before doing anything else
- 2Read and note the code, clear it and road test the car to see whether it returns
- 3Read the steering angle with diagnostic equipment when the wheel is straight ahead and at left and right lock
- 4When the wheel angle reading is off, a workshop zeroes it and recalibrates the stability system
- 5Steering and the stability system are safety critical: do not work on them yourself; leave this to a workshop, and drive carefully until the fault is fixed
Objawy, które możesz zauważyć5
- Traction control warning lamp on
- Stability function does not work
- Traction control does not work
- Adaptive cruise control and collision warning do not work
- Cruise control will not engage
Na co może wpływać usterka2
- Traction control and stability control can be disabled
- Active yaw control (AYC) is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.