VOLVO
BCM-C006101 - Lateral Acceleration Sensor. General Failure Information. General electrical failure
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S80 (2007–), V50 (2004–2013), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (14)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2012
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Tylko silnik: B8444S
- Volvo XC90 (2003–)2007–2010Tylko silnik: B6324S, B8444S
- Volvo XC90 (2003–)2011Tylko silnik: B6324S5, B8444S
- Volvo XC90 (2003–)2012Tylko silnik: B6324S5
- Volvo XC90 (2003–)2013–2014Wszystkie silniki oprócz: B5254T9
Co oznacza ten kod błędu?
On cars with DSTC, the brake control module (BCM) receives signals on yaw angle, lateral acceleration and tilt from the stability sensor (BSC). If the module receives an incorrect signal from the lateral accelerometer, the code is set and the stability functions are switched off.
Możliwe przyczyny
- Open circuit or short to ground in the wires to the AYC sensor
- Internal fault in the AYC sensor or the stability sensor
Co możesz zrobić
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check the wires to the stability sensor for breaks and short circuits to ground
- 3Check that the correct stability sensor is fitted, particularly on all-wheel drive cars
- 4Read the sensor status with diagnostic equipment and replace the stability sensor if the fault remains
- 5The braking system is safety critical: do not work on the stability sensor or braking system yourself; leave this to a workshop
Objawy, które możesz zauważyć5
- General warning lamp on
- Anti-spin and stability function do not work
- Anti-skid function does not work
- Adaptive cruise control and collision warning do not work
- Traction control does not work
Na co może wpływać usterka2
- Traction control, stability control and dynamic stability control (AYC) are blocked
- Roll stability control (RSC) is blocked on cars that have it
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.