VOLVO
BCM-C006276 - Longitudinal Acceleration Sensor. Mechanical Failures. Wrong mounting position
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
On the V40, the brake control module (BCM) has found that the longitudinal acceleration sensor, which is located in the airbag control module, is incorrectly positioned. The airbag control module has come loose, so the sensor's measurements are wrong.
Możliwe przyczyny
- Airbag control module has come loose
Co możesz zrobić
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Have a workshop check that the airbag control module is securely fixed and that its mounting is intact
- 3Look for faults in the airbag system with diagnostic equipment
- 4The airbag and braking system are safety critical: do not work on the airbag control module or braking system yourself; leave this to a workshop
Objawy, które możesz zauważyć3
- Anti-spin and anti-skid indication shows a fault or no indication
- Anti-spin function does not work
- Stability function does not work
Na co może wpływać usterka3
- Traction control is blocked
- Stability control is blocked
- Active yaw control (AYC) is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.