BCM-C006328 - Yaw Rate Sensor. General Signal Failures. Signal bias level out of range / zero adjustment failure
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
13 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (14)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Co oznacza ten kod błędu?
The yaw rate sensor in the stability sensor has a correction value for its individual deviation, and the brake control module has judged the value to be unreasonable. The fault most often lies in how the stability sensor is fitted, and the brake control module is normally not the fault.
Możliwe przyczyny
- Stability sensor incorrectly fitted
- Loose stability sensor
- Bent bracket for the stability sensor
- Internal fault in the stability sensor
Co możesz zrobić
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check that the stability sensor is secure and correctly fitted, and that the bracket under the passenger seat is not bent
- 3Check the sensor with diagnostic equipment. If the fault remains, the stability sensor needs replacing by a workshop
- 4Read the codes in the airbag system too, as this code can sometimes be linked to a fault there
- 5The braking system is safety critical: do not work on the stability sensor or braking system yourself; leave this to a workshop
Objawy, które możesz zauważyć5
- Anti-spin function does not work
- Stability function does not work
- Cruise control will not engage
- Front monitoring and active safety do not work
- Brake pedal requires more force than normal
Na co może wpływać usterka2
- Traction control and stability control can be disabled
- Active yaw control (AYC) is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.