VOLVO
BCM-C006464 - Roll Rate Sensor. Algorithm Based Failures. Signal plausibility failure
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
13 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (16)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2009–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Wszystkie silniki oprócz: D82PHEV
- Volvo V60 (2011–)2015Wszystkie silniki oprócz: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2009–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2009–2015
Co oznacza ten kod błędu?
On cars with roll stability control (RSC), the brake control module (BCM) judges the signal from the stability sensor's roll rate sensor to be implausible. The fault most often lies in the sensor's mounting or in the sensor itself, and roll control is blocked until the fault is fixed.
Możliwe przyczyny
- Stability sensor incorrectly fitted
- Loose stability sensor
- Bent bracket for the stability sensor
- Internal fault in the stability sensor
Co możesz zrobić
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Make sure the stability sensor is firmly fixed and correctly fitted under the passenger seat, and look for any bend in its bracket
- 3Have a workshop read the sensor status and replace the stability sensor if the fault remains
- 4If the code points to the airbag system, the fault may lie there, so have the workshop check that system too
- 5The braking system is safety critical: do not work on the stability sensor or braking system yourself; leave this to a workshop
Objawy, które możesz zauważyć5
- Yellow warning symbol and message in the display
- Anti-spin and anti-skid indication shows a fault or no indication
- Stability function does not work
- Anti-spin function does not work
- Cruise control will not engage
Na co może wpływać usterka3
- Traction control and stability control can be disabled
- Active yaw control (AYC) is blocked
- Roll control (RSC) is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.