VOLVO
BCM-C006A17 - Multi-axis Acceleration Sensor. General Electrical Failures. Circuit voltage above threshold
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S80 (2007–), V50 (2004–2013), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (14)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2012
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Tylko silnik: B8444S
- Volvo XC90 (2003–)2007–2010Tylko silnik: B6324S, B8444S
- Volvo XC90 (2003–)2011Tylko silnik: B6324S5, B8444S
- Volvo XC90 (2003–)2012Tylko silnik: B6324S5
- Volvo XC90 (2003–)2013–2014Wszystkie silniki oprócz: B5254T9
Co oznacza ten kod błędu?
The voltage to the AYC sensor in the stability system is above the threshold. This can be caused by the supply wire being shorted to supply voltage or by an internal fault in the sensor, and the stability functions are switched off.
Możliwe przyczyny
- Supply wire shorted to supply voltage
- Internal fault in the AYC sensor
- Internal fault in the stability sensor
Co możesz zrobić
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Check the wires to the AYC sensor for chafing and a short to supply voltage
- 3Check that the charging system works, as excessive voltage in the car can cause this fault
- 4Measure the supply voltage with diagnostic equipment and replace the AYC sensor if the wiring and voltage are in order
- 5The braking system is safety critical: do not work on the AYC sensor or braking system yourself; leave this to a workshop
Objawy, które możesz zauważyć5
- General warning lamp on
- Anti-spin function does not work
- Stability function does not work
- Anti-skid function does not work
- Adaptive cruise control and collision warning do not work
Na co może wpływać usterka1
- Traction control, stability control and dynamic stability control (AYC) are blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.