VOLVO
BCM-C006A95 - Multi-axis Acceleration Sensor. Component Failures. Incorrect assembly
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
11 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (12)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2015Wszystkie silniki oprócz: B4204T12, D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Co oznacza ten kod błędu?
The brake control module (BCM) has found that an incorrect variant of stability sensor is fitted in the car. The variants differ depending on whether the car is all-wheel drive or has hill start assist. When the fitted sensor does not match the car's configuration, the stability functions are blocked.
Możliwe przyczyny
- Wrong variant of stability sensor fitted
- Stability sensor does not match the car's drivetrain or equipment
Co możesz zrobić
- 1Check which stability sensor is fitted and whether it has recently been replaced
- 2Read and note the code, clear it and road test the car to see whether it returns
- 3Have a workshop fit the correct variant of stability sensor and calibrate it afterwards
- 4Until the fault is fixed, take care on uphill and downhill slopes, as the car may start to roll
- 5The braking system is safety critical: do not work on the stability sensor yourself; leave this to a workshop
Objawy, które możesz zauważyć5
- Anti-spin indicator lit
- Traction control does not work
- Stability function does not work
- Adaptive cruise control and collision warning do not work
- The car may roll backwards in D on a slope uphill and forwards in R on a slope downhill
Na co może wpływać usterka1
- Traction control, stability control and dynamic stability control (AYC) are blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.