VOLVO
BCM-C008254 - Brake System Malfunction Indicator. System Programming Failures. Missing calibration
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
11 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (14)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Wszystkie silniki oprócz: D82PHEV
- Volvo V60 (2011–)2015Wszystkie silniki oprócz: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Co oznacza ten kod błędu?
The brake control module (BCM) has checked the calibration values it stores for the stability sensor and the airbag control module, and the checksum does not match. This often happens when one of these modules has been replaced, and the stability functions are then blocked until the brake control module has been calibrated.
Możliwe przyczyny
- Internal fault in the brake control module
- Brake control module not calibrated
Co możesz zrobić
- 1Have a workshop calibrate the brake control module with diagnostic equipment. This is especially needed after replacing the stability sensor or the airbag control module
- 2Road test the car and check that the code no longer appears
- 3If the code status is still permanent after calibration, the stability sensor needs checking, and the workshop replaces it if needed
- 4The braking system is safety critical: do not carry out the calibration or work on the braking system yourself; leave this to a workshop
Objawy, które możesz zauważyć5
- Anti-spin and anti-skid indication shows a fault or no indication
- Stability function does not work
- Adaptive cruise control and collision warning do not work
- Cruise control will not engage
- Traction control does not work
Na co może wpływać usterka3
- Traction control is blocked
- Stability control is blocked
- Active yaw control (AYC) is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.