VOLVO
BCM-C100086 - Hill Descent Control (HDC) Function. Algorithm Based Failures. Signal invalid
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (12)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2012
- Volvo V60 (2011–)2013–2014Wszystkie silniki oprócz: D82PHEV
- Volvo V60 (2011–)2015Wszystkie silniki oprócz: D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Co oznacza ten kod błędu?
The hill descent control (HDC) receives information from the central electronic module, the engine management and the transmission control module over the data network. When that information is missing, invalid or absent, the brake control module cannot use it, and the function is blocked.
Możliwe przyczyny
- Interference or temporary breaks on the CAN network
- Contact resistance or oxidation in connectors and joints
- Fault in the central electronic module
- Fault in the engine control module
- Fault in the transmission control module
Co możesz zrobić
- 1Read the codes in the central electronic module, the engine management and the transmission control module, and deal with them first
- 2Check that the battery is in good condition and that the connectors on the data network are secure and free from oxidation
- 3Make sure the wiring is not close to interference sources, such as mobile phones
- 4Trace the data network with diagnostic equipment. Clear this code only once the faults in the other modules are fixed
- 5The braking system is safety critical: do not work on the brake control module or the data network yourself; leave this to a workshop
Objawy, które możesz zauważyć1
- Hill descent assist does not work
Na co może wpływać usterka1
- Hill descent control (HDC) is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.