VOLVO
BCM-C100A54 - Brake Pedal Angle Sensor. System Programming Failures. Missing calibration
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
On the V60, the brake control module (BCM) has found that the calibration of the brake pedal angle sensor is missing or has not been carried out correctly. Functions that depend on the pedal signal, such as hill descent assist, may therefore be blocked until calibration is done.
Możliwe przyczyny
- Calibration of the brake control module is missing
Co możesz zrobić
- 1Clear the codes in the brake control module and road test the car to see whether they return
- 2Have a workshop calibrate the brake pedal angle sensor with diagnostic equipment
- 3If the fault returns, the brake control module needs replacing by a workshop, and the workshop must then recalibrate the acceleration sensor and the internal sensors
- 4The braking system is safety critical: do not work on the calibration or the braking system yourself; leave this to a workshop
Objawy, które możesz zauważyć4
- Hill descent assist does not work
- Front monitoring and adaptive cruise control do not work
- Hill start assist does not work
- Anti-spin function does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.