VOLVO
BCM-C100F11 - Brake Pedal Angle Sensor Supply. General Electrical Failures. Circuit short to ground
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
On the V60, the brake control module (BCM) has detected a short to ground in the supply to the brake pedal angle sensor. The sensor needs a supply to measure the pedal position, so without it the pedal signal becomes incorrect.
Możliwe przyczyny
- Brake pedal angle sensor shorted to ground
- Damaged wiring to the brake pedal angle sensor
- Damaged brake pedal angle sensor
Co możesz zrobić
- 1Read and note the code, clear it and road test the car to see whether it returns
- 2Look for damage in the wiring to the brake pedal angle sensor, particularly where it may have chafed against ground
- 3Check the angle sensor with diagnostic equipment and replace it if damaged
- 4The braking system is safety critical: do not work on the brake pedal sensor yourself; leave this to a workshop, and drive carefully until the fault is fixed
Objawy, które możesz zauważyć4
- Anti-spin function does not work
- Hill descent assist does not work
- Hill start assist does not work
- Front monitoring and adaptive cruise control do not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.