VOLVO
BCM-C101846 - Regenerative Braking. System Internal Failures. Calibration / parameter memory failure
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelV60 (2011–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
On the V60, the brake control module (BCM) has found that the calibration of the brake energy recovery system is missing or was not carried out correctly. The system includes several brake sensors, the pump and valves, and it must be calibrated to work properly.
Możliwe przyczyny
- Calibration not carried out correctly
- Calibration missing
Co możesz zrobić
- 1Clear the codes in the brake control module and road test the car to see whether they return
- 2Have a workshop carry out the calibration of the brake energy recovery system with diagnostic equipment
- 3If the fault returns, the brake control module needs replacing by a workshop, and the workshop must then recalibrate the acceleration sensor and the internal sensors
- 4The braking system is safety critical: do not work on the calibration or the braking system yourself; leave this to a workshop
Objawy, które możesz zauważyć4
- ABS does not work or activates suddenly
- Anti-spin function does not work
- Hill descent assist does not work
- Hill start assist does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.