VOLVO
BCM-C110668 - Communication between control modules. Algorithm error. Event-controlled information
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelXC90 (2003–)
Co oznacza ten kod błędu?
The brake control module (BCM) checks that the steering angle is plausible compared with the car's other signals, once the steering angle sensor has been initialised. The check has not passed at a sufficient speed, so the dynamic stability control is switched off. The code is often linked to the steering angle sensor.
Możliwe przyczyny
- The plausibility check of the steering angle has not passed
- Fault in the steering angle sensor (SAS), if a code for it is also stored
Co możesz zrobić
- 1Read the codes in the brake control module and check whether a code for the steering angle sensor is also stored
- 2If this code is stored on its own it can be cleared, and the car then road tested
- 3If a steering angle sensor code is also present, have a workshop diagnose the sensor with diagnostic equipment
- 4The brake and stability systems are safety-critical, so have a workshop carry out any work on the module
Objawy, które możesz zauważyć2
- General warning lamp on
- Anti-skid function does not work
Na co może wpływać usterka1
- Dynamic stability control (AYC) is disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.