VOLVO
BCM-C110964 - Vehicle Dynamics Control Switch. Algorithm Based Failures. Signal plausibility failure
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
6 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (7)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
Co oznacza ten kod błędu?
The brake control module (BCM) has registered that the signal to switch off the DSTC/ESC stability system has been active for too long. The system always starts with stability control switched on and can only be switched off manually with the thumb wheel on the left steering stalk. The fault most often means a control has stuck or communication has been disturbed.
Możliwe przyczyny
- One or more controls on the left steering stalk have stuck in the activated position
- Interference or brief interruptions on the data network (CAN)
- Fault in the central electronic module (CEM), which sends the signal
Co możesz zrobić
- 1Check that the control on the left steering stalk moves freely and is not stuck, and that nothing is pressing on it
- 2Check the fuses for the stability system
- 3Clear the code and check that it does not return after the control has been tested
- 4If the fault remains, have a workshop read the codes in the central electronic module and check the data network with diagnostic equipment
- 5The stability and brake systems are safety-critical, so have a workshop carry out any work on the module
Objawy, które możesz zauważyć1
- No clear symptoms for the driver
Na co może wpływać usterka1
- The DSTC/ESC stability system cannot be switched off during the current drive
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.